Safety Alert

<<< Back to Results

Printable version

P&A: TRAPPED GAS RELEASED WHEN PUNCHING TUBING


Country: ---

Location: ---

Incident Date: ---   Time: ---

Type of Activity: ---

Type of Injury: ---

Function: ---


P&A Operation on Gas Injector well

Semisubmersible in 318m water depth.

Course of events:

Annulus filled with 1.32 sg brine and tubing with approximately 1.2 sg. Performed flow check prior to punching tubing - well stable.

Observed increase in trip tank shortly after punching tubing. Some return was expected due to different fluid density.

Closed UAP and LAP after gain of 2 m3. Trip tank volume continued to increase and it was decided to close BSR and cut wireline.

Gas level increased to 82%LEL in rotary table on drill floor. This activated the rig ESD1 (20%) and ESD2 (60%).

Well was monitored with closed BSR and UAP. The pressure stabilized at 8 bar. Gas level in rotary decreased to 1-2% LEL.

After several hours with stable pressures, gas in BOP was circulated out. UAP and BSR were opened without observation of more gas. Performed flow check - well stable.

 

What Went Wrong?:

The tubing had been displaced (lube and bleed) to clear fluid using a light well intervention boat after they had set a mechanical barrier plug to isolate the reservoir. The insufficient displacement of the tubing did not remove all hydrocarbons. After the tubing was punched the fluid from the annulus u-tubed into the tubing and the remaining hydrocarbons escaped to surface. There was no landing string (HP riser) or WL BOPís rigged up.

Gas released on drill floor.

UAP and LAP not able to seal around WL string.

 

Corrective Actions and Recommendations:

Evaluate to perform similar operations with workover riser/pressure control equipment.

Small amount of gas can be "hidden" in wells even if the well is lubricated and left for a long time (1 year in this case).

 

Figure 1 Ė Well bore schematic
images


safety alert number: 278
IOGP Safety Alerts http://safetyzone.iogp.org/

Disclaimer

Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither the IOGP nor any of its members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient's own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms.
This document may provide guidance supplemental to the requirements of local legislation. Nothing herein, however, is intended to replace, amend, supersede or otherwise depart from such requirements. In the event of any conflict or contradiction between the provisions of this document and local legislation, applicable laws shall prevail.


London office: City Tower, 40 Basinghall St, 14th Floor, London EC2V 5DE, United Kingdom    T. +44 (0)20 3763 9700    F. +44 (0)20 3763 9701    E. reception@iogp.org
Brussels Office: Bd du Souverain 165, 4th Floor, B-1160 Brussels, Belgium    T. +32 (0)2 566 9150    F. +32 (0)2 566 9159    E. reception@iogp.org
Houston Office: 10777 Westheimer Road, Suite 1100, Houston, Texas 77042, United States    T. +1 (713) 470 0315    E. reception@iogp.org